Recently Viewed
You haven’t configured any products yet.
We’ll save your past configurations here temporarily, be sure to save them using the “Save for Later” links.
Saved
No Saved Selections
Be sure to save your configurations using the “Save for Later” links.
Configure by Series
I can identify the series and am able to configure my product.
Visual ID
I have my product in hand but need assistance identifying it.
Contact a Specialist
I have a photograph and would prefer talk with a specialist.

Visual ID

Getting Started
First things first, have your valve in hand and watch this video for a quick overview of what we will be looking at while identifying your valve.
Valve Type
Use the chart of products below to select your valve
Replacement Actuator-Ready Ball Valve
Performance Automation Series
Model 87
Model 87
Select
General Industrial Series
Model 86
Model 86
Select
Serviceable Series
Model 89
Model 89
Select
Compression End Series
Model 82
Model 82
Select
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The materials used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Model 87 - Image

Model Number Located on Valve Body

1/4
1
87
2
6
3
RTV
4
6
5
  • 1   Pipe Size
  • 2   Model
  • 3   Body Material (1 = Brass, 6 = Stainless Steel)
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Model 86 - Image

Model Number Located on Valve Body

1/4
1
86
2
6
3
RT
4
6
5
  • 1   Pipe Size
  • 2   Model
  • 3   Body Material (1 = Brass, 4 = Carbon Steel, 6 = Stainless Steel)
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connections offered; NPT (National Pipe Taper) female screwed end, Socket Weld and Tube Socket Weld.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal, thrustwasher and body seals.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Model 89 - Image

Model Number Located on Valve Body

1/2SE F6
1
0.5
2
89
3
6
4
RTV
5
6
6
  • 1   Pipe Size / Connection Type
  • 2   Port Size
  • 3   Model
  • 4   Body Material
  • 5   Seal Materials
  • 6   Ball & Stem Material 
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection Compression End (Tube).
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Model 82 - Image

Model Number Located on Valve Body

1/2TC
1
0.4
2
82
3
6
4
RT
5
6
6
  • 1   Pipe Size / Connection Type
  • 2   Port Size
  • 3   Model
  • 4  Body Material
  • 5  Seal Materials
  • 6  Ball & Stem Material
  • 

* Valve Operator Type Not Shown on Valve Body
Replacement Manual Ball Valve
General Industrial Series Compression End Series
Lever
Lever
Select
General Industrial Series Compression End Series
Latching Lockable
Latching Lockable
Select
General Industrial Series Compression End Series
Oval
Oval
Select
General Industrial Series Compression End Series
Wing
Wing
Select
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Lever - Image

Model Number Located on Valve Body

X
1
XX
2
X
3
XX
4
X
5
  • 1   Size / Connection
  • 2   Model
  • 3   Body Material
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Latching Lockable - Image

Model Number Located on Valve Body

X
1
XX
2
X
3
XX
4
X
5
  • 1   Size / Connection
  • 2   Model
  • 3   Body Material
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Oval - Image

Model Number Located on Valve Body

X
1
XX
2
X
3
XX
4
X
5
  • 1   Size / Connection
  • 2   Model
  • 3   Body Material
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Valve Connection Size
The size measured in inches of the ball valve connection. Valve Connection is NPT (National Pipe Taper) female screwed end.
Valve Body Material
The material used in the construction of the ball valve body.
Valve Seal Material
The material(s) used for the sealing components consisting of the ball seats, stem seal(s) and thrustwasher.
Valve Ball & Stem Material
Valve Operator Type
Version of Pneumatic, Electric or Manual Operator
Wing - Image

Model Number Located on Valve Body

X
1
XX
2
X
3
XX
4
X
5
  • 1   Size / Connection
  • 2   Model
  • 3   Body Material
  • 4   Seal Materials
  • 5   Ball & Stem Material
  • 

    * Valve Operator Type Not Shown on Valve Body
Replacement Electric Actuator
General Industrial Series Compression End Series
Model 600
Model 600
Select
Generate Valve Model Number

Reference the diagram and key on the right to find your valve number located on the valve body. Fill out the form below to configure your valve and access spec sheets and ordering information.

Model Number
Model 600 - Image

Model Number / Volts Located on Nameplate

Replacement Pneumatic Actuator
Performance Automation Series
Model C500
Model C500
Select
General Industrial Series Serviceable Series Compression End Series
Model A500
Model A500
Select
Legacy Series
Model 400
Model 400
Select
Generate Actuator Model Number

Reference the image on the right to find your actuator model number located on the actuator name plate. Select the correct actuator model from the drop down below to access spec sheets and ordering information.

Model Number
Model C500 - Image

Model Number / Volts Located on Nameplate

Generate Actuator Model Number

Reference the image on the right to find your actuator model number located on the actuator name plate. Select the correct actuator model from the drop down below to access spec sheets and ordering information.

Model Number
Model A500 - Image

Model Number Located on Nameplate (Normally Closed Models Shown)

Generate Actuator Model Number

Reference the image on the right to find your actuator model number located on the actuator name plate. Select the correct actuator model from the drop down below to access spec sheets and ordering information.

Model Number
Model 400 - Image

Model Number Located on Nameplate (Normally Closed Models Shown)

Replacement Pneumatic Actuator Accessory
All Series
Model 3GP/4GP Solenoids
Model 3GP/4GP Solenoids
Select
All Series
Model LS-1 Limit Switch
Model LS-1 Limit Switch
Select
Generate Solenoid Valve Model Number

Determine the solenoid valve model (3GP, 4GP, or 5GP). The model is noted on the solenoid valve nameplate. Select the corresponding model number and desired voltage via the drop down menu below.

Model Number
Model 3GP/4GP Solenoids - Image

Model Number Located on Nameplate Voltage Located on Coil

Generate Solenoid Valve Model Number

Determine the solenoid valve model (3GP, 4GP, or 5GP). The model is noted on the solenoid valve nameplate. Select the corresponding model number and desired voltage via the drop down menu below.

Model Number
Model LS-1 Limit Switch - Image
Can’t find your model number?
Contact A Specialist.
Fill out the form below and a Gemini Valve Specialist will contact you within 24 hours.
  • Drop files here or
    Max. file size: 768 MB.
    • This field is for validation purposes and should be left unchanged.

    Looking for a replacement part or a specific model?

    Find the Product Model Here